Baldor D5007P 7.5 HP 1750/2300 RPM SHUNT WOUND 218AT Frame WE CRATE & SHIP INTL

THIS IS A WAREHOUSE REMODEL LIQUIDATION OF SPARE PARTS. THIS UNIT HAS NOT BEEN USED IT IS NEW ON THE SHELF BEING LIQUIDATED TO MAKE ROOM FOR REMODEL.

BEING SOLD AT HALF MSRP OVER $22,000 MSRP AT MOTION INDUSTRIES

THIS UNIT WILL SHIP FREIGHT YOU CAN SEE DETAILS BELOW
WE CAN SHIP INTERNATIONAL. PLEASE ASK FOR AN ACCURATE QUOTE
WE CAN SHIP TO MANY INTERNATIONAL AREAS EVEN BY AIR VERY AFFORDABLY.
SAMPLE RATE OF A 350 lb item US to Germany was $463.00 VIA AIR
SAMPLE RATE OF 700lb item US to England was $770.00 VIA AIR

BELOW IS INFORMATION PER SPECS FROM MANUFACTURER WEBSITE PORTRAYED AS ACCURATLY AS POSSIBLE HOWEVER WE ARE POSTING INFORMATION COPY AND PASTED( PLEASE ENSURE BY LOOKING AT TAGS ON PHOTOS ITEM MATCHES YOUR NEEDS)


The Baldor-Reliance D5007P is a 7.5 HP, 1750 / 2300 RPM DC motor. It belongs to the Baldor-ABB Motors Shunt Wound SCR Series and is engineered for precise speed and constant torque industrial applications.
Technical Specifications

* Motor Type: Shunt-wound, brushed DC motor.
* Frame Size: NEMA 218AT.
* Voltage Ratings: 500 V Armature / 150/300 V Field.
* Current Draw: 13.2 A Armature / 0.69 A Field.
* Enclosure: DPFG (Drip-Proof Fully Guarded), self-ventilated.
* Shaft Diameter: 1.375 inches (1-3/8") with standard pulley-end extension.
* Mounting: Rigid base, F1 layout.
* Insulation: Class F.

Performance Characteristics & Components

* Constant Pressure Springs: Built with constant pressure brush springs to minimize ongoing maintenance and ensure even brush wear.
* Low Inertia Armature: Designed with a low inertia armature to allow for rapid, crisp response times during operation.
* Thermal Protection: Features an integrated thermostat on the interpole for high-limit temperature safety.
* Tachometer Adaptable: Ready to accept tachometer integration for advanced feedback loops.
* Pulley Application: Ideal for high-torque belt-and-pulley operations such as plastic extruders, heavy conveyors, and packaging machinery.

The Baldor-Reliance Catalog No. 10142 is a small 0.17 HP (approximately 1/8 HP), 3450 RPM AC industrial induction motor built for three-phase power systems. According to the manufacturer data sheets from Baldor-ABB, it features a compact, totally enclosed design suited for continuous commercial or industrial duty.
Technical Specifications

* Horsepower: 0.17 HP
* Synchronous Speed: 3600 RPM (nominal) / 3450 RPM at full 60Hz load
* Electrical Phase: 3-Phase (3 PH)
* Frequency: Dual-rated for 50 Hz (2850 RPM) and 60 Hz (3450 RPM)
* Voltage Ratings: 208-230/460 Volts AC
* Full Load Amperage: 0.66-0.60 A (at 208-230V) / 0.30 A (at 460V)
* Enclosure Type: TEFC (Totally Enclosed Fan Cooled)
* Frame Size: NEMA 42C (C-Face mounting without standard base rigid legs)
* Shaft Diameter: 0.375 inches (3/8")
* Motor Design / Type: Design B, Type 3313M
* Service Factor: 1.00

Why Are These Two Motors Attached?
Industrial DC motors like the Baldor D5007P generate substantial internal heat when run continuously at low speeds or under high-torque loads. Because the motor's built-in shaft fan slows down alongside the armature, it cannot provide enough airflow to cool itself at low RPMs.
To solve this, engineers bolt a small, independent AC motor-like the Baldor 10142-onto the main frame's ventilation inlet. This small 3450 RPM motor runs at a constant high speed, pushing a steady stream of top-tier cooling air through the big DC motor regardless of how slow the main 7.5 HP shaft is turning. This layout transforms the assembly from a standard DPFG (Drip-Proof Fully Guarded) motor into a Blower-Ventilated (DPFV) system, maximizing its operating lifespan.
**WE SHIP INTERNATIONAL**
DUE TO SIZE THIS ITEM IT WILL SHIP VIA FREIGHT PLEASE SEE INFORMATION BELOW. DONT HESITATE TO ASK IF YOU HAVE QUESTIONS

DELIVERY OF ITEMS OVER 150 LBS

Freight & Logistics Instructions Terms

Due to a dimensions and weight over 150 lbs unless customer picks up this will be professionally palletized, strapped, and boxed and or crated tans shipped via common LTL freight carriers or possibly via air or ocean freight. Otherwise Warehouse pickup is gladly accommodated at our commercial location in Neenah, WI.

WE CAN SHIP DOMESTIC FREIGHT AND ASSIST WITH SHIPPING INTERNATIONAL FREIGHT.

WE DO GET VERY GOOD INTERNATIONAL RATES TO MANY AREAS. AND SURPRISINGLY SOMETIMES WE GET QUOTERS AND CAN SHIP TRANSATLANTIC BY AIR FOR THE SAME COST OR LESS THAN DOMESTICALLY HOWEVER WE WILL NEED TO RUN A CUSTOM QUOTE FOR YOU IF YOUR INTERESTED PLEASE ASK.

Custom Freight Quote or Terminal Locators? Contact Troy for freight Support: 920--419--3898

Most items ship from FOB Stillman Company in Neenah Wisconsin.

1. Baseline Commercial Rates

* Our standardized lowest cost flat-rate shipping pricing applies **strictly** to commercial or industrial zoning districts that maintain normal daytime operational staffing (Monday thru Friday, 8 AM to 3 PM) and are equipped with a raised loading dock or a forklift capable of accepting and removing a full pallet from a 53-foot tractor-trailer.

* Customer may also make freight terminal pickups at a local carrier hub at no fee to the standard baseline rate. Let us know if you wish to do this prior to shipping (PICKUP MUST BE WITHIN 48 HOURS OF FREIGHT ARRIVING AT HUB TO AVOID STORAGE COSTS)

Additional Delivery Services Available for Locations Most special delivery fees range from an additional $25 to $100 depending on area and the freight carrier.

1. For Non staffed locations Appointment deliveries can be requested prior to shipping. (Additional Fee may apply)
2. If you do not have a forklift we can schedule a Lift Gate Delivery for a special truck to lower freight to ground.(Additional Fee may apply)

2. Residential, Farm, & Specialized Limited Access Freight Deliveries

* In accordance with carrier policies and guidelines, deliveries routing to residential areas, home-based businesses, farms, educational facilities, or limited-access zones carriers will likely require a limited access delivery fee. Surcharges to these areas can vary but typically range from $25 to $100 **But can be higher or lower**. You can ask us if this will apply if you are concerned so we can quote you. We will notify you if a fee applies.

3. Insurance


* Typically less than 1% of the time loss or damage can occur during shipment. Some equipment that is rare, high value, specialized or high value may be insurable during shipment. Seller will at times ship some products with third party freight insurance and or buyer may request it. Buyer and Seller agree that insurance is subject to terms based on the carrier or broker. Seller agrees to cooperate and provide available information in event of a claim. Buyer agrees to cooperate in all cases with seller to fulfill insurance requirements in cases of damage or loss during shipment. In some cases this will require buyer to provide timely response, fill out a statement, or provide pictures etc. These actions must be completed timely. Buyer agrees to cooperate with insurance requests. Buyer agrees that Stillman Co cannot guarantee successful claims. Buyer agrees to assist seller in the event of a claim. In some cases return with refund may be the only option however in some cases another option may be the approved mitigation option provided by insurance. Buyer in some cases may be able to keep the product and seller will upon insurance company approval assist buyer with insurance claims to the best of their ability to reimburse, repair, or replace product to the limitation of insurance.

Crucial Carrier Freight Mandates and Disclosure:

* Transparent Disclosure: Consignees must accurately verify their structural unloading capacity and zoning type **prior to freight dispatch**. Buyers accept total financial liability for any supplemental transport fees or accessorial charges generated due to undisclosed property parameters.
* On-Call Communications: You must supply a secure, direct telephone number at checkout. Freight dispatchers will hold freight at the local terminal if the consignee fails to answer delivery scheduling window attempts, incurring storage/redelivery penalties at the buyers expense.
* Zero Manual Unloading: Commercial freight operators are strictly prohibited by insurance regulations from letting buyers hand-unload loose equipment out of a standard box truck. You must have mechanical extraction equipment on-site or request a hydraulic liftgate truck in advance.

Custom Freight Quote or Terminal Locators? Contact Troy at Logistics Support: 920--419--3898

Legal Terms of Sale & Compliance

1. Receiving Inspections & Transit Damage Management

Do not release the carrier driver without inspection. You **must** completely strip away protective wrapping and visually audit this machinery for concealed transit damages **prior to signing the carrier delivery receipt**. If structural or mechanical damage is discovered, you must write an explicit, highly detailed description of the damage directly onto the driver's delivery manifest and take photographic evidence instantly. Signing a delivery receipt clean clears the carrier of liability, completely voids our insurance tracking loop, and makes any subsequent damage claims impossible.

2. ABSOLUTE WAIVER OF LIABILITY FROM USE, INDEMNIFICATION, AND DEFECT ACKNOWLEDGMENT:

This commercial heavy duty equipment that can easily cause bodily harm or death. By executing payment for this equipment, the buyer acknowledges, understands, and expressly agrees to the following structural legal boundaries:

*

Assumption of Total Risk: By purchasing this product, The buyer accepts all equipment from stillman company at arrival and assume all liability for safety and operation with all known and unknown defects, flaws that may exist beyond visual and physical mechanical testing loops. Buyer accepts product knowing installing and or operating purchased product is under their sole discretion and shall be done using an abundance of caution for themselves and anyone around them and also an abundance of caution for physical buildings and property.

*

Factory New Dealer Equipment and Products - Factory New products that Stillman Co sells based on the description may or may not come with a manufacturer parts warranty. Manufacturer Parts warranty will be provided Subject to standard use and subject to Manufacturer terms and will not over physical damage or accidental damage. Please see description and pictures. Items labeled as factory new and working will come with a not dead on arrival (DOA) guarantee. In these cases buyer agrees to accept at seller discretion and pre approval either an option of a return and refund, or parts reimbursement, or a partial reimbursement. Any equipment requiring non standard electrical, gas, licensed, or specialized technician hookup will require documentation that it was properly installed. This does not include open box, demo, 1 time use products unless specifically stated.

*

All Other products and Used Equipment : Buyer accepts as is, and where is upon delivery/pickup pictured unless otherwise agreed to in writing. Return options if offered do not change as is terms of product and are not guarantees of warranty or safety and .

*

Zero Seller Liability: Buyer accepts ALL liability for use of product and buyer agrees Stillman Co (the Seller) assumes absolutely zero liability for any physical injury, property damages, mechanical failures, operational disruptions, product loss, or legal compliance fines that may occur during or as a result of installing, utilizing, or operating this heavy commercial machinery for any reason whatsoever.

*

Total Buyer Indemnification: The buyer explicitly assumes 100% of the operational risk and agrees to fully defend, indemnify, and hold harmless the seller against any subsequent claims, damages, losses, liabilities, or expenses arising out of the handling, deployment, or active manufacturing and or use of this equipment.

3. Certified Technical Verification & seller Return Windows

To safeguard against hookup mistakes or facility power phase faults, all mechanical or operational claims must be accompanied by a formal diagnostic invoice from a certified commercial kitchen service company or licensed commercial electrician within three (3) business days of tracking arrival. This used equipment is sold strictly as-is, as-pictured. Approved, uninstalled, and unopened returns are accepted within 14 days; however, the buyer assumes absolute responsibility for coordinating and paying all freight costs both ways, along with any applicable structural 20% restocking fees unless otherwise approved in writing.

Return Window vs. Warranty Definition: Any standard return options are transactional satisfaction periods and are not guarantees. The existence of a return policy is NOT a product warranty, an extended technical guarantee, nor a legal admission certifying that the equipment was entirely perfect or completely defect-free or safe. Buyer understands that seller is stating that this equipment is accepted as is and may come with flaws that may or may not be known or disclosed at time of sale or delivery and it is up to buyer to use dilligence for safe use of product.

3. Legal Venue & Jurisdictional Agreement

Subject to buyer payment for this equipment, the buyer agrees that Any legal actions, or litigation arising from this sale shall be initiated within courts in the State of Wisconsin, Winnebago County.