ABB PSE300-600-70-480V - ABB PSE Series Solid-State Reduced Voltage Softstarter

ABB PSE300-600-70-480V - ABB PSE Series Solid-State Reduced Voltage Softstarter


Appears as it may have been lightly used. Comes from large shut down manufacturer

WE SHIP INTERNATIONAL - WE CAN SHIP OVERNIGHT


Ordering

Minimum Order Quantity: 1 piece
Customs Tariff Number: 85044090

Popular Downloads

Data Sheet, Technical Information: 1SFC132005C0201
Instructions and Manuals: 1SFC132057M0201

Dimensions

Product Net Width: 190.000 mm
Product Net Height: 550.000 mm
Product Net Depth / Length: 236.500 mm
Product Net Weight: 13.9 kg

Technical

Rated Operational Voltage: Main Circuit 208 ... 600 V AC
Rated Control Supply Voltage (Us): 100 ... 250 V AC
Rated Control Circuit Voltage (Uc): DC Operation 24 V
Rated Frequency (f): Main Circuit 50/60 Hz
Control Supply 50/60 Hz
Rated Operational Power - In-Line Connection (Pe): (230 V) 90 kW
(400 V) 160 kW
(500 V) 200 kW
Rated Operational Current - In-Line Connection (Ie): 300 A
Service Factor Percentage: 100 %
Overload Protection: Build-in electronic overload protection
Integrated Electronic Overload: Yes
Adjustable Rated Motor Current Ie: 30 ... 100 %
Starting Capacity at Maximum Rated Current Ie: 4xIe for 10s
Ramp Time: During Start 1 ... 30 second [unit of time]
During Stop 0 ... 30 second [unit of time]
Initial Voltage During Start: 30 ... 70 %
Step Down Voltage Special Ramp: No %
Current Limit Function: 1.5 ... 7xIe
Switch for Inside Delta Connection: No
Run Signal Relay: Yes
By-pass Signal Relay: Yes
Fault Signal Relay: Yes
Overload Signal Relay: Yes
Analog Outputs: 4...20 mA
Signal indication completed start ramp (LED): Green
Signal indication ready to start/standby ON (LED): Green
Signal indication running R (LED): Green
Signal indication ramping up/down (LED): Green
Signal indication protection (LED): Yellow
Signal indication fault (LED): Red
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time: 10
Communication: FiledBusPlug(Optional)
Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00
Terminal Type: Main Circuit: Bars
Connecting Capacity Main Circuit: Hole Diameter 10.2 mm
Width and Thickness 20x5 mm
Connecting Capacity Control Circuit: Rigid 1x2.5 mm²
Rigid 2x1.5 mm²
Connecting Capacity Supply Circuit: Rigid 1x2.5 mm²
Rigid 2x1.5 mm²
Tightening Torque: Main Circuit 28 N·m
Supply Circuit 0.5 N·m
Control Circuit 0.5 N·m
Product Main Type: PSE300